VJ-1624X/1624WX/1924WX OPERATION MANUAL 5 Panel setup menu
5.6 Sleep Mode menu 263
5.6.2 Sleep Mode Start menu
Activate Sleep Mode
During Sleep Mode, "Restart–>Enter" will be displayed in the operation panel.
During Sleep Mode, pressing [Enter] key will return the printer to Normal.
• If the printer is under one of the following conditions while shifting to the Sleep Mode, "Don’t Start
Sleep Mode" is displayed, and will not shift to the Sleep Mode.
• Front cover is open.
• Maintenance cover is open.
• Media loading lever is raised.
• Head height is set to High (VJ-1624WX/1924WX only).
• Waste fluid tank is full.
• Ink cartridge is empty.
• Ink cartridge has been removed.
• An ink cartridge other than genuine Ink cartridges is inserted into Cartridge slot, etc.
Activate Sleep Mode again after returning the printer to a normal state.
7.2 Error messages
• If the printer is under one of the conditions above during the Sleep mode, the printer will not return
to the Normal condition even after pressing the [Enter] key.
Return the printer to a normal state, and press the [Enter] key to return the printer to normal
operation.
7.2 Error messages
Setup item Setting Description
Start Start Sleep Mode? • [Enter] key: activates Sleep Mode.
• [Cancel] key: shifts to the previous menu without activating
Sleep Mode.
5.6 Sleep Mode menu
The following content is displayed on Operation panel.
<Restart –> ENTER>
• [Enter] key: return the printer to normal operation.
To Next Page
Loading...
