6 Maintenance VJ-1624X/1624WX/1924WX OPERATION MANUAL
274 6.1 Replacing consumable components
3. Take out the new Ink pack from the bag.
• Open the bag just before attaching Ink pack to High-capacity ink pack adapter.
Leaving Ink pack with the bag open for a long time may result in abnormal printing.
• Do not insert or remove High capacity pack adapter more than 6 times.
If High-capacity ink pack adapter is inserted/removed more than 6 times, Connector rubber will
require replacement.
4. Install Ink pack and IC chip card to High-capacity ink pack adapter.
• Shake Ink packs 2 to 3 times lightly before installing them into High-capacity ink pack adapter.
To install/remove Ink pack or IC chip to/from High-capacity ink pack adapter, refer to the operation
manual included with High-capacity ink pack adapter.
5. Insert High-capacity ink pack adapter into Ink cartridge slot.
Make sure that Ink pack and IC chip are installed on High-capacity ink pack adapter before
inserting it into Ink cartridge slot. If High-capacity ink pack adapter is inserted into Ink cartridge
slot without Ink pack, the remaining information will be rewritten and the Ink pack will not be
usable.
• Insert High-capacity ink pack adapters all the way in Ink cartridge slots.
6. Confirm that Operation panel returns to Normal.
Printing resumes when High-capacity ink pack adapter is replaced during printing.
• High-capacity ink pack adapter replacement is complete.
To Next Page
Loading...
Need help?
General