NAiS FP Series Hardware Manual

FP0 HardwareAnalog I/O Unit
4-8 Matsushita Electric Works (Europe) AG
Notes
1) The time noted below is required before the analog data is
reflected in the control unit output.
Waiting for
processing
1ms × number of
expansion units
10V
K0
K2000
0ms to
scan time
Analog output
WY2
0V
Refresh
Conversion time
(500µs)
2) Refer to the schematic diagram of insulation methods on the
previous page.
3) The number for the output contact point being used varies
depending on the expansion location (see page 7 - 5).

NAiS FP Series Specifications

General

Brand	NAiS
Model	FP Series
Category	Controller
Language	English