Features
Voice Mail, Centralized
Networking ◆ 91
System ConÞguration Example
When using only local voice mail(s), refer to Voice Mail, Local (page 93).
Only Centralized Voice Mail
● The inbound and outbound calls in Systems A and B can access the centralized voice mail
(600).
● Program 11-07-01 must be set to none (for the voice mail group) in System-A, otherwise, the
operation of the centralized voice mail will be disabled.
● Trunk calls must be routed to ring group 103 (Centralized Voice Mail) in System A or B. A
trunk routed to ring group 102 (Local Voice Mail) will fail.
● The DID voice mail tag (@xxx) can be used in Program 22-11-02 at System A and B.
● The voice mail function key (service code 851 + 77), conversation record key (service code
851 + 78) and auto attendant key (service code 851 + 79) can be used at System A and B.
System A
System B
11-01-01 Dial 6x = Type 2
(Intercom)
11-01-01 Dial 6x = Type 8
(Networking)
11-07-01 Group 64 = None 11-07-01 None
15-03-01 For each voice mail extension
= Dial Pulse (0)
15-03-01 For each voice mail extension
= Dial Pulse (0)
15-03-03 For each voice mail extension
= Special (1)
15-03-03 For each voice mail extension
= Special (1)
16-02-01 For each voice mail extension
= Group 64 and set the priority
(1-64)
16-02-01 None
45-01-01 0 45-01-01 0
45-01-07 600 45-01-07 600
45-01-08 64 45-01-08 None
With Aspire
Mail / Aspire
Mail DMS
Only:
45-01-10
Enabled (1) With Aspire
Mail / Aspire
Mail DMS
Only:
45-01-10
Disabled (0)
SYSTEM A SYSTEM B
CENTRALIZED
VOICE MAIL (600)
To Next Page
Loading...
