Programming
25-03 : VRS/DISA Transfer Ring Group With Incorrect Dialing
Networking ◆ 185
25-03 : VRS/DISA Transfer Ring Group With Incorrect Dialing
Description
Use Program 25-03 : VRS/DISA Transfer Ring Group With Incorrect Dialing to set what hap-
pens to a call when the DISA or Automated Attendant caller dials incorrectly or waits too long to
dial. The call can either disconnect (0) or Transfer to an alternate destination (a ring group or voice
mail). When setting the DISA and DID Operating Mode, you make an entry for each Night Service
mode.
Input Data
Conditions
None
Feature Cross Reference
● Direct Inward System Access (DISA)
Level:
Aspire S Aspire M/L/XL
IN • Available. • Available.
• Applicable to IP and ISDN Networking. • Applicable to IP and ISDN Networking.
Trunk Port Number Aspire S: 1-8
Aspire: 001-200
Item No.
Day/Night
Mode
Incoming Group Number Default Related Program
01 Aspire S: 1-4
Aspire: 1-8
0 (Disconnect)
1-8 or 1-100 (Incoming Group)
102 (In-Skin/External Voice Mail)
103 (Centralized Voice Mail)
0 22-04
To Next Page
Loading...
