Programming
44-01 : System Options for ARS/F-Route
196 ◆ Networking
44-01 : System Options for ARS/F-Route
Description
Use Program 44-01 : System Options for ARS/F-Route to deÞne the system options for the ARS/
F-Route feature.
Input Data
Conditions
None
Feature Cross Reference
● Automatic Route Selection (ARS)/F-Route
Telephone Programming Instructions
To enter data for Program 44-01 (System Options for ARS/F-Route):
1. Enter the programming mode.
2. 44 01
3. Enter the number of the item you want to program.
4. Enter data for the item you selected + HOLD.
5. Enter data for the next item in the program.
OR
Press MSG once to enter a new item number.
OR
Press MSG until you’ve exited that series’s programming section.
Level:
Aspire S Aspire M/L/XL
IN • Available. • Available.
• Applicable to IP and ISDN Networking. • Applicable to IP and ISDN Networking.
Item No. Item Input Data Default
01 ARS/F-Route Time Schedule
If this option is set to ‘0’, the F-Route table selected is determined only by the
digits dialed without any relation to the day or time of the call.
If this option is set to ‘1’, the system Þrst refers to Program 44-10. If there is
a match, the pattern deÞned in that program is used. If not, the F-Route pat-
tern in Program 44-09 and time setting in 44-08 are used.
0 = Not Used
1 = Used
0
44-01-01
F-Route_Mode 0:No
back
↑↑
↑↑
↓↓
↓↓
select
44-01-nn
nnnnn
←←
←←
→→
→→
To Next Page
Loading...
Need help?
General
