NEC Aspire Series User Manual

Features
Department Step Call
64 ◆ Networking
Department Step Call
Department Step Call
After calling a busy Department Calling Group member in a networked system, an extension user
can have Department Step Calling Quickly call another member in the group.
Operation
To make a Step Call:
You step through Extension Groups set in Program 16-02.
1. Place call to busy Department Group member.
OR
Place call to Department Group pilot number.
2. Dial #.
OR
Press Step Call key (PGM 15-07 or SC 851: 36).
3. Repeat step 2 to call other Department Group members.
Related Programs
Program Number Title
11-12-07 Service Code Setup (for Service Access) - Step Call
11-16-01 Single Digit Service Code Setup - Step Call
20-06-01 Class of Service for Extensions
20-08-12 Class of Service Options (Outgoing Call Service) - Department Step
Calling

NEC Aspire Series Specifications

General

Series	Aspire
Protocols	SIP, H.323
Lines	IP
Extensions	Digital, IP
Voicemail	Integrated Voicemail System
Networking	IP Networking
Power Supply	100-240V AC, 50/60Hz
Dimensions	Varies depending on the system module
Weight	Varies depending on the system module