Programming
26-02 : Dial Analysis Table for ARS/LCR
Networking ◆ 191
26-02 : Dial Analysis Table for ARS/LCR
Description
Use Program 26-02 : Dial Analysis Table for ARS/LCR to set pre-transaction tables for selecting
Automatic Route Selection (ARS).
● Service Type 1 (Route to Trunk Group Number) - The number routes to a trunk group.
● Service Type 2 (F-Route Selected) - The number is controlled by the F-Route table.
Input Data
Level:
Aspire S Aspire M/L/XL
IN
• Available. • Available.
• Dial Analysis Tables increased from 200 to
400 with software 2.63+.
• Dial Analysis Tables increased from 200 to
400 with software 2.63+.
Dial Analysis Table Number 1-400
Item No. Item Input Data Default
01 Dial Dial Digits (16 digits maximum)
1-9, 0, *, #, or @ for wild character
(Press line key 1)
No Setting
02 Service Type 0 = No ARS
1 = Route to Trunk Group
2 = Select F-Route Access
0
03 Additional Data / Service
Number
In Service Type 1: Select Trunk
Group Number (0-100, 0=no route)
In Service Type 2:
F-Route Time Schedule Not Used =
0-500 (F-Route Table Number).
Refer to Program 44-05.
F-Route Time Schedule Used =
0-500 (F-Route Selection Number).
Refer to Program 44-04.
0
04 ARS Class of Service 0-16 10
05 Dial Treatment 0-15 0
To Next Page
Loading...
Need help?
General
