Programming
11-16 : Single Digit Service Code Setup
Networking ◆ 155
11-16 : Single Digit Service Code Setup
Description
Use Program 11-16 : Single Digit Service Code Setup to customize the one-digit Service Codes
used when a busy or ring back signal is heard. You can customize additional Service Codes in Programs
11-10 through 11-15. The following chart shows:
● The number of each code (01-10)
● The function of the Service Code.
● What type of telephones can use the Service Code
● The code’s default entry. For example, dialing 1 (code 03) when calling an extension will
switch the call from either a voice or signal call (depending on how it’s currently deÞned).
● Programs that may be affected by changing these codes.
If you change a Service Code, be sure to record your entry in the “New” column.
Input Data
Conditions
None
Level:
Aspire S Aspire M/L/XL
IN
• Available. • Available.
• Applicable to IP and ISDN Networking. • Applicable to IP and ISDN Networking.
• Item 11 requires software 2.64+. • Item 11 requires software 2.64+.
Item
No.
Item Default New
Related
Program
01 Step Call #
02 Barge In No Setting
03 Switching of Voice/Signal Call 1
04 Intercom Off Hook Signaling 7
05 Camp-On 2
06 DND/Call Forward Override No Setting
07 Message Waiting 0
08 Voice Over 6
09 Access to Voice Mail 8
10 STG All Ring Mode No Setting 16-01-05
11 Personal Park No Setting
To Next Page
Loading...
Need help?
General
