Introduction
About This Manual
8 ◆ Networking
About This Manual
Using This Manual
This manual is in three sections:
● Section 1: Setting Up the Networking Feature
This section guides you step by step in setting up a basic Networking system. You'll learn how
to:
● Program the Aspire system for Networking
● Program the Aspire system for Networking with Voice Mail
● Set Up the Voice Mail for Networking
● Section 2: Features
This section provides details on system features and how they work with a networked system.
● Section 3: Programming Basics
This section describes the programming basics for the Aspire phone system.
Telephone Programming Instructions shows you how to enter the program’s data into sys-
tem memory. For example:
1. Enter the programming mode.
2. 15-07-01
tells you to enter the programming mode, dial 150701 from the telephone dial pad. After you
do, you’ll see the message “15-07-01 TEL301” on the Þrst line of the telephone display. This
indicates the program number (15-07), item number (01), and that the options are being set for
extension 301. The second row of the display “KY01 = *01” indicates that Key 01 is being
programmed with the entry of *01. The third row allows you to move the cursor to the left or
right, depending on which arrow is pressed. To learn how to enter the programming mode, see
How to Enter the Programming Mode (page 102).
● Appendix: Examples of Aspire Networking ConÞgurations
This section shows diagrams and simple programming instructions for Aspire Networking.
15-07-01 TEL301
KY01 = *01
←←
←←
→→
→→
To Next Page
Loading...
Need help?
General
