NEC Aspire Series - Feature Cross Reference

Programming
16-01 : Department Group Basic Data Setup
Networking ◆ 167
Conditions
None
Feature Cross Reference
● Department Calling
05 Department Group All Ring Mode
Operation
Determine whether calls ringing a
Department Group should ring all
extensions in the group simultaneously
automatically or manually when using
the service code deÞned in Program
11-12-09.
0 = Manual
1 = Automatic
0 11-16-10
06 STG Withdraw Mode
- Not Used -
0 = Disable (Camp On)
1 = Enable (Overßow Mode)
0
07 Call Recall Restriction for STG
Determine whether a or not an unan-
swered call transferred to a Department
Group should recall the extension from
which it was transferred.
0 = Disable (Recall)
1 = Enable (No Recall)
0
08 Queuing for Department Group Call
To have Department Group calls queue
when busy, set this entry to “1” for an
extension or voice mail group.
0 = No Queuing
1 = Queuing
(This program allows entries of 1-32,
however, the system accepts any entry
other than “0” as to allow queuing.)
0
09 Department Hunting No Answer
Time
Set how long a call will ring a Depart-
ment group extension before hunting
occurs.
0-64800 seconds 15
10 Hunt Type
Set the type of hunting for each Exten-
sion (Department) Group:
0 = No queuing
1 = Hunting When Busy
2 = Hunting When Not Answered
3 = Hunting When Busy or No Answer
0
Item
No.
Item Input Data Default
Related
Program