Programming
44-05 : ARS/F-Route Table
Networking ◆ 205
Conditions
None
Feature Cross Reference
● Automatic Route Selection (ARS)/F-Route
Telephone Programming Instructions
To enter data for Program 44-05 (ARS/F-Route Table):
1. Enter the programming mode.
2. 44 05
3. Enter the number of the item you want to program.
4. Select the ARS/F-Route Table number to be programmed by pressing the FLASH or the
VOLUME ▲ or VOLUME ▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press MSG once to enter a new item number.
OR
Press MSG until you’ve exited that series’s programming section.
08 Dial Treatment
Select the Dial Treatment to be used for the table.
If a Dial Treatment is selected, Programs
44-05-02 and 44-05-03 are ignored and the Dial
Treatment deÞned in Program 26-03-01 is used
instead.
0-15 0
44-05-01 F-route TBL1
PRI1:TRK GP =0
back
↑↑
↑↑
↓↓
↓↓
select
44-05-nn F-route TBLnnn
nnnnn
←←
←←
→→
→→
To Next Page
Loading...
