Features
Selectable Display Messaging
84 ◆ Networking
Selectable Display Messaging
Selectable Display Messaging
An extension user can select a preprogrammed Selectable Display Message for their extension.
This message will be displayed on an incoming intercom caller’s LCD when they call the extension
in a networked system.
Operation
To select a message:
1. Press idle CALL key + dial *4.
OR
Press Call Forward (Device) key (PGM 15-07 or SC 851: 17).
OR
Press idle CALL key + press Text Message key (PGM 15-07 or SC 851: 18) + enter digits to
append, if needed + SPK to hang up. Skip the remaining steps.
2. Dial 3 + Message number (01-20).
Use VOL ▲ or VOL ▼ to scroll through the messages.
3. (Optional for messages 1-8 and 10)
Dial the digits you want to append to the message.
You can append messages 1-8 and 10 with digits (e.g., the time when you will be back).
You enter the time in 24-hour format, but it displays in 12-hour format.
4. Press SPK to hang up.
To cancel a message:
1. Press idle CALL key + dial *4.
OR
Press Call Forward (Device) key (PGM 15-07 or SC 851: 17).
OR
Press idle CALL key + press Text Message key (PGM 15-07 or SC 851: 18) + SPK to hang
up.
2. Dial 3.
3. Press SPK to hang up.
Related Programs
Program Number Title
20-13-19 Class of Service Options (Supplementary Service) - Selectable Display
Messaging
20-16 Selectable Display Messages
To Next Page
Loading...
