Features
Intercom
74 ◆ Networking
Intercom
Intercom
An extension user can make an intercom call to a networked system if the networked extensions are
deÞned with the Network Access Code (Program 11-01, Dial Type = 8).
A user can change the signaling type for the intercom call they place to either a voice announce or
ringing call to extension in a networked system.
Conditions
● The system does not support the use of the Voice Over feature to an extension across the
network.
Operation
To place an Intercom call:
1. At keyset, press idle CALL key.
OR
At single line telephone, lift handset.
2. Dial extension number (or 0 for your operator).
Your call may voice-announce or ring the called extension. Dial 1 to change the way
your call alerts the called extension.
If the extension you call is busy or doesn’t answer, you can dial another extension
without hanging up.
Related Programs
Program Number Title
11-12-06 Service code of Voice/Signal Change
11-16-03 One digit service code of Voice/Signal Change
20-06-01 Class of Service for Extensions
20-08-01 Class of Service Options (Outgoing Call Service) - Intercom Calls
To Next Page
Loading...
