Programming
44-02 : Dial Analysis Table for ARS/F-Route Access
198 ◆ Networking
Conditions
None
Feature Cross Reference
● Automatic Route Selection (ARS)/F-Route
03 Additional Data
For the Service Type selected in 44-02-02, enter
the additional data required.
• 1: Delete Digit = 0-255 (255=delete all digits)
• 2: [Program 44-01 : 0]
ARS/F-Route Table Number = 0-500 (0=No
setting)
Refer to Program 44-05.
[Pr
ogram 44-01 : 1]
ARS/F-Route Select Table Number = 0-500
(0=No setting)
Refer to Program 44-04.
• 3: Dial Extension Analyze Table Number = 0-
4 (0=No setting)
Refer to Program 44-03.
• 1: Delete Digit = 0-255
(255 : delete all digits)
• 2: 0-500 (0=No setting)
• 3: Dial Extension Analyze
Table Number = 0-4 (0=No
setting)
0
04 Dial Tone Simulation
If enabled, this option sends dial tone to the call-
ing party once the routing is determined. This
may be required if the central ofÞce at the desti-
nation does not send dial tone.
0=off
1=on
0
Item No. Item Input Data Default
To Next Page
Loading...
Need help?
General
