Programming
84-12 : H.323 Phone CODEC Information Basic Setup
Networking ◆ 233
84-12 : H.323 Phone CODEC Information Basic Setup
Description
Use Program 84-12 : H.323 Phone CODEC Information Basic Setup to setup the CODEC
information of H.323 phones and IP Networking. Refer to Program 84-01 for H.323 trunk
CODECs.
Input Data
Level:
Aspire S Aspire M/L/XL
IN
• Available. • Available.
• Item 31 available with software 2.63+.
• Item 32 available with software 4.93+
• Item 31 available with software 2.63+.
• Item 32 available with software 4.93+
Item
No.
Item Input Data Default
Related
Program
01 G711 Audio Frame
Prior to software 2.63, the only entry possible was “2”
or “3”. With software 2.63+, additional entries are
available.
Note: Currently, only the Aspire S system can use the
10ms setting. Aspire will provide this option in the
future.
1 - 3
(1 = 10ms,
2 = 20 ms,
3 = 30ms)
3
02 G711 VAD Mode 0 = Disable
1 = Enable
0
03 G711 Type 0 = A-law
1 = μ-law
1
04 G.711 Jitter Buffer Min 0~145 ms 30
05 G.711 Jitter Buffer Type 0~145 ms 60
06 G.711 Jitter Buffer Max 0~145 ms 120
07 G.729 Audio Frame
Prior to software 2.63, only entries 3-8 were available.
With software 2.63+, additional entries are available.
Note: Currently, only the Aspire S system can use the
10ms setting. Aspire will provide this option in the
future
1-8
(1 = 10ms,
2 = 20ms, etc.)
3
08 G.729 VAD Mode 0 = Disable
1 = Enable
0
09 G.729 Jitter Buffer Min 0~500 ms 30
10 G.729 Jitter Buffer Type 0~500 ms 60
11 G.729 Jitter Buffer Max 0~500 ms 120
To Next Page
Loading...
Need help?
General
