Programming
44-07 : Gain Table for ARS/F-Route Access
208 ◆ Networking
44-07 : Gain Table for ARS/F-Route Access
Description
Use Program 44-07 : Gain Table for ARS/F-Route Access to set the gain/PAD table. If an exten-
sion dials ARS/F-Route number;
● The Extension Dial Gain Table is activated, which is assigned in Program 44-05.
● The Extension Dial Gain Table follows “Outgoing transmit” and “Outgoing receive” settings.
If the incoming call is transferred to another line using ARS/F-Route;
● The Tandem Gain Table is activated, which is assigned in Program 44-05.
● The Tandem Gain Table follows the “Incoming transmit” and “Incoming receive” settings for
incoming line, and “Outgoing transmit” and “Outgoing receive” settings for the outgoing line.
Note: For ARS/F-Route calls, the CODEC gains deÞned in Program 14-01-02 and 14-01-03 are
not activated.
Input Data
Conditions
None
Feature Cross Reference
● Automatic Route Selection (ARS)/F-Route
Level:
Aspire S Aspire M/L/XL
IN • Available. • Available.
• Applicable to IP and ISDN Networking. • Applicable to IP and ISDN Networking.
Gain Table Number 1-500
Item No. Item Input Data Default
01 Incoming Transmit 1-63
(-15.5 ~ +15.5dB)
32
02 Incoming Receive 1-63
(-15.5 ~ +15.5dB)
32
03 Outgoing Transmit 1-63
(-15.5 ~ +15.5dB)
32
04 Outgoing Receive 1-63
(-15.5 ~ +15.5dB)
32
To Next Page
Loading...
Need help?
General
