NEC Aspire Series - Feature Cross Reference; Telephone Programming Instructions

Programming
84-06 : VOIPU Setup
232 ◆ Networking
Conditions
The system programming must be exited before these program options to take affect.
Feature Cross Reference
● VoIP
Telephone Programming Instructions
To enter data for Program 84-06 (VOIPU Setup):
1. Enter the programming mode.
2. 84 06
3. Enter the number of the item you want to program.
4. Select the slot number to be programmed by pressing the FLASH or the VOLUME ▲ or
VOLUME ▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press MSG once to enter a new item number.
OR
Press MSG until you’ve exited that series’s programming section.
11 Ready/Ready-Answer
Port Number
0-65535 4000
12 Long Tail Echo (LTEC)
Mode
0 = Off
1 = On
0
13 Long Tail Echo Code
(LTEC) Type
1 = G.729AB
2 = G.723.1
1
14 Long Tail Echo (LTEC)
Tail Size
1 = 8msec
2 = 16msec
3 = 32msec
4 = 64msec
5 = 128msec
5
15 10ms Payload Mode 0 = Off
1 = On
0
84-06-01 Slot1
RTP Port No. 10020
back
↑↑
↑↑
↓↓
↓↓
select
84-06-nn Slotnn
nnnnn
←←
←←
→→
→→