NEC Aspire Series - 11-01: System Numbering

Programming
10-12 : NTCPU Network Setup
120 ◆ Networking
Conditions
The system must be reset in order for these changes to take affect.
Feature Cross Reference
● VoIP
06 NAPT
Router
Setup
Enable or
disable the
NAPT
Router
Setup.
With SIP
trunking
behind a
NAPT
router, this
must be
set to
enabled.
0=Disable, 1=Enable 0
07 NAPT
Router IP
Address
Set the
NAPT
Router IP
Address.
With SIP
trunking,
the IP
address of
the WAN
side of the
router
must be
entered.
0.0.0.1 - 126.255.255.254
128.0.0.1 - 191.255.255.254
192.0.0.1 - 223.225.225.254
0.0.0.0
08 ICMP
Redirect
0=Enable, 1=Disable 0