Programming
10-32 : PRI Networking Channel Limitation
128 ◆ Networking
10-32 : PRI Networking Channel Limitation
Description
Use Program 10-32 : PRI Networking Channel Limitation to assign the number of B-channels
to be used for each ISDN PCB. This allows for fractional PRIs when used with multiple site net-
working. If this program is limited to less than "23" on one side of the network, then it also limits
both inbound and outbound network calls. For example, when you select 10 channels then only
channels 1 to 10 will be available. If a call is attempted on channels 11 to 30 the caller will receive
busy tone. This also applies on the other side of the network as well.
The setting is for each slot within the Aspire system; ensure that you select the correct slot before
making any changes.
This program will not affect a PRI card set as Trunk or Station mode.
Input Data
Conditions
None
Feature Cross Reference
Networking
Level:
Aspire S Aspire M/L/XL
IN • Not Available. • Available with software 2.09+.
Slot Number 1 - 16
Item
No.
Item Input Data Default
Related
Program
01 Maximum Channels 1 - 23 Slots 1-16 = 23
To Next Page
Loading...
