Programming
11-10 : Service Code Setup (for System Administrator)
144 ◆ Networking
11-10 : Service Code Setup (for System Administrator)
Description
Use Program 11-10 : Service Code Setup (for System Administrator) to customize the Service
Codes for the System Administrator. You can customize additional Service Codes in Programs 11-11
through 11-16. The following chart shows:
● The number of each code (01-27)
● The function of the Service Code.
● What type of telephones can use the Service Code
● The code’s default entry. For example, dialing *3 (item 26) allows users to force a trunk line
to disconnect.
● Programs that may be affected with the changing the code.
If you change a Service Code, be sure to record your entry in the “New” column.
Input Data
Level:
Aspire S Aspire M/L/XL
IN
• Available. • Available.
• Applicable to IP and ISDN Networking.
• Aspire Wireless service code items 30 and
31 are not available.
• Service Codes 32-34 available with soft-
ware 4.93+.
• Applicable to IP and ISDN Networking.
• Aspire Wireless service code items 30 and
31 are available with software 2.63+.
• Service Codes 32-34 available with soft-
ware 4.93+.
Item
No.
Item Terminals Default New
Related
Program
01 Day / Night Mode Switching KTS, SLT 818 12-xx
20-07-01
02 Changing the Music on Hold Tone KTS 881 10-04
03 Setting the System Time KTS 828
04 Storing Common Abbreviated Dialing Numbers KTS 853
05 Storing Group Abbreviated Dialing Numbers KTS 854
06 Setting the Automatic Forwarding for Each Trunk
Line
KTS 833 24-04-01
07 Canceling the Automatic Forwarding for Each Trunk
Line
KTS 834 24-04-01
08 Setting the Destination for Automatic Trunk Forwarding KTS 835 24-04-01
09 Not Used No Setting
10 Not Used - - - -
To Next Page
Loading...
Need help?
General
