NEC Aspire Series - Page 55

Features
ARS/F-Route
Networking ◆ 45
➻ 44-05-01 : ARS/F-Route Table - Trunk Group Number
Select the trunk group number to be used for the outgoing ARS call (0-100, 101-150, 255 [0 =
No setting, 101-150 = Networking, 255 = Extension Call]). Using the 4-digit extension num-
ber example in Program 11-01-01, the entry would be: ARS/F-Route Table Number 1: Priority
Number 1, Trunk Group = 255; ARS/F-Route Table Number 2: Priority Number 1, Trunk
Group = 101.
➻ 44-05-02 : ARS/F-Route Table - Delete Digits
Enter the number of digits to be deleted from the dialed number (0-255 [255 = Delete all]).
Using the 4-digit extension number example in Program 11-01-01, the entry would be: ARS/
F-Route Table Number 1: Priority Number 1, Delete Digits = 1; ARS/F-Route Table Number
2: Priority Number 1, Delete Digits = 0.
➻ 44-05-03 : ARS/F-Route Table - Additional Dial Number Table
Enter the table number (deÞned in Program 44-06) for additional digits to be dialed (0-1000).
Using the 4-digit extension number example in Program 11-01-01, the entry would be: ARS/
F-Route Table Number 1: Priority Number 1, Additional Dial Number Table = 0; ARS/F-
Route Table Number 1: Priority Number 1, Additional Dial Number Table = 0.