NEC express5800 A2010b - Page 318

7. Using Remote Management
Chapter 3 Setup
Edit page
Setting range and default value
Item name
Setup value (*1)
Default setting (*2)
Management LAN
Management LAN
Show LAN port to communicate with BMC.
Management LAN(*3)
Shared BMC LAN(*4)
Management LAN
Basic
Connection Type (*5)
Specify a connection type.
Auto Negotiation
1Gbps Full Duplex
1Gbps Half Duplex
100Mbps Full Duplex
100Mbps Half Duplex
10Mbps Full Duplex
10Mbps Half Duplex
Auto Negotiation
MAC Address
Show MAC address of BMC Management LAN.
DHCP
Enable or disable DHCP.
Enabled
Disabled
Disabled
IP Address
Specify IP address.
192.168.1.100(*9)
Subnet mask
Specify subnet mask address.
255.255.255.0
Default gateway
Specify default gateway address.
0.0.0.0
Dynamic DNS (*6)
Enable or disable dynamic DHCP.
Enabled
Disabled
Disabled
DNS Server
Specify address of DNS server.
0.0.0.0
Host Name
Specify host name.
Blank



Express5800/A1040b, A2040b, A2020b, A2010b User's Guide
318