7. Using Remote Management
Edit page
Setting range and default value
See Section 7.7.1 BMC (1) Network (a) .
• Setting of "Permitted Address" and "Blocked Address" are common to IPv4 Property
(Standby).
• While editing "Permitted Address" or "Blocked Address" on IPv4 Property (Master), do
not edit them on IPv4 Property (Standby) on web console of another session, and vice
versa.
Buttons
See Section 7.7.1 BMC (1) Network (a) .
Express5800/A1040b, A2040b, A2020b, A2010b User's Guide
321
To Next Page
Loading...