7. Using Remote Management
(b) IPv4 Property (Standby)
Overview
Use this page to configure IPv4 network for standby BMC. Administrator privilege is required to refer or modify
settings.This page is not displayed on A1040b model.
Browse page
Buttons
① [Edit] button
Press the [Edit] button to modify the setup value of each item.
② [Reload] button
Press the [Reload] button to display the latest information.
• When the operator privilege user moves to this page, ‘Failed to access BMC.’
diag
pops up, and nothing is displayed on the settings value. Administrator
privilege is required to refer or modify settings.
Express5800/A1040b, A2040b, A2020b, A2010b User's Guide
320
To Next Page
Loading...