NetCommWireless NF18ACV

VDSL/ADSL2+ Dual Band AC1600 Gigabit Gateway with VoIP
109 of 131
© NetComm Wireless 2017
Figure 125 – Update Firmware page
Management – Reboot
This option reboots the NF18ACV. Please allow up to 5 minutes for device to reboot.
Figure 126 – Reboot button
Note 1. – It may be necessary to reconfigure your TCP/IP settings to adjust for the new configuration. For example, if you disable the
Dynamic Host Configuration Protocol (DHCP) server you will need to apply Static IP settings to your Network interface card (NIC).
Note 2. – If you lose all access to your web user interface, simply press and hold the reset button on the rear panel for 10 seconds to
restore default settings