NetCommWireless NF18ACV

VDSL/ADSL2+ Dual Band AC1600 Gigabit Gateway with VoIP
81 of 131
© NetComm Wireless 2017
Wireless – Wireless Bridge (Wireless Distribution Service)
Wireless Bridge allows you to configure the router’s access point as a Wireless Distribution Service.
Figure 98 – Wireless Bridge page
Select the mode for the Wireless Access Point built into the NF18ACV. You can specify which wireless networks will be
allowed to connect to the NF18ACV by using the Bridge Restrict option and then entering the applicable MAC Addresses of
the other wireless access points.
Note – WPA/WPA2 encryption may not be compatible with other vendors, when operating in Wireless Bridge (WDS) mode.
Click Apply/Save to save the new wireless bridge configuration settings.