NetCommWireless NF18ACV

46 of 131
User Guide
© NetComm Wireless 2017
Figure 45 – NAT -- Virtual Server Configuration page
Field
Description
Select a Service or custom
Server
Select a pre-configured port forwarding rule or choose custom server to
create your own port forwarding rule.
Server IP Address
Enter the IP address of the local server/host.
External Port Start
Enter the starting external port number range (when custom server is
selected). When a predefined service is selected this field will be
completed automatically.
External Port End
Enter the ending external port number range (when custom server is
selected). When a predefined service is selected this field will be
completed automatically.
Protocol
Options include: TCP, UDP or TCP/UDP
Internal Port Start
Enter the starting internal port number range(when custom server is
selected). When a predefined service is selected this field will be
completed automatically.
Internal Port End
Enter the ending internal port number range (when custom server is
selected). When a predefined service is selected this field will be
completed automatically.
Table 16 – NAT -- Virtual Server settings table
Click Save/Apply to save your settings when you have finished creating virtual servers.