NetCommWireless NF18ACV

VDSL/ADSL2+ Dual Band AC1600 Gigabit Gateway with VoIP
79 of 131
© NetComm Wireless 2017
Wireless – Security
The NF18ACV supports all encryptions within the 802.11 standard. The factory default is WPA2-PSK. The NF18ACV also
supports: WPA, WPA-PSK, WPA2 or WPA2-PSK
You can also select to disable WPS mode.
Figure 95 – Wireless Security
The following parameters are available:
Parameter
Definition
Enable WPS
Select to enable or disable the WPS function of the NF18ACV.
Select SSID
Select the SSID to apply the security settings to.
Network Authentication
Select the Wireless security type to use with the wireless network.
The default is WPA2-PSK.
The NF18ACV also supports: WPA, WPA-PSK, WPA2, WPA2-PSK
WPA/WAPI passphrase
Enter the security key to use with the wireless network.
WPA Group Rekey Interval
Enter the group rekey interval. This should not need to change.
WPA/WAPI Encryption
Select the type of encryption to use on the wireless network.