The user name is admin.The default password is password.The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > WPS Wizard.
The page displays a description of the WPS method.
5. Click the Next button.
The Add WPS Client page adjusts.
The Push Button (recommended) radio button is selected by default.
6. Select the PIN Number radio button.
7. In the Enter Clients’ PIN field, enter the PIN number of the WiFi device.
8. Click the Next button.
For four minutes, the modem router attempts to find the WiFi device (that is, the client) that you want to join the
modem router’s main WiFi network.
During this time, the WiFi LED on the top panel of the modem router blinks white.
9. Within four minutes, go to the WiFi device and use its WPS software to join the network without entering a
password.
When the modem router establishes a WPS connection, the WiFi LED lights solid white and the Add WPS Client
page displays a confirmation message.
10. To verify that the WiFi device is connected to the modem router’s main WiFi network, select BASIC > Attached
Device.
The WiFi device displays onscreen.
Manage the Basic WiFi Settings and WiFi Security of the Guest
Network
A guest network allows visitors to use the Internet without using your WiFi security key. By default, the guest WiFi
network is disabled.You can enable and configure the guest WiFi network for each WiFi band. The modem router
Manage the WiFi Network Settings
107
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000
To Next Page
Loading...
Need help?
General
Weight and Dimensions
