Access Storage Devices From a Remote Computer
You can access storage devices that are attached to your modem router form a remote computer.
To access devices from a remote computer:
1. Launch a web browser on a computer that is not on your home network.
2. Connect to your modem router, on your home network:
• To connect with Dynamic DNS, type the DNS name.
To use a Dynamic DNS account, you must enter the account information on the Dynamic DNS page (see
Set Up and Manage Dynamic DNS on page 176).
• To connect without Dynamic DNS, type the modem router’s Internet port IP address.
You can view the modem router’s Internet IP address on the BASIC Home page.
Set Up FTP Access Through the Internet
If you attach a storage device to the modem router, you can access the storage device from your network (see
Enable FTP Access Within Your Network on page 166).You can also set up FTP access through the Internet so that
you can access the storage device from outside your local network, for example, when you are not at home.
To set up FTP access through the Internet:
1. Launch a web browser from a computer or WiFi device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the modem router user name and password.
The user name is admin.The default password is password.The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ReadySHARE.
The USB Storage (Basic Settings) page displays. By default, the Basic radio button is selected.
Manage Dynamic DNS and Access Storage Devices Through the Internet
180
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000
To Next Page
Loading...
Need help?
General
Weight and Dimensions
