4. Select ADVANCED > Advanced Setup > Wireless Settings.
5. Enter the settings as described in the following table.
The descriptions in the table apply to both the Advanced Wireless Settings (2.4GHz b/g/n) section and the
Advanced Wireless Settings (5GHz 802.11a/n/ac) section.
DescriptionField
The fragmentation length (the default is 2346), the CTS/RTS threshold (the default is 2347),
and the preamble mode (the default is Long Preamble) are reserved for WiFi testing and
advanced configuration only.
Do not change these settings unless directed by NETGEAR support or unless you are sure
what the consequences are. Incorrect settings might disable the WiFi function of the modem
router unexpectedly.
Fragmentation Length
(256-2346)
CTS/RTS Threshold (1-2347)
Preamble Mode
6. Click the Apply button.
Your settings are saved.
Use the Modem Router as a WiFi Access Point
You can set up the modem router to function as a WiFi access point (AP) on the same local network as another
router. When the modem router functions as a WiFi AP, many router-related features are disabled.
Manage the WiFi Network Settings
119
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000
To Next Page
Loading...
Need help?
General
Weight and Dimensions
