5. Click the View list of blocked devices not currently connected to the network link.
A table displays the detected device name, MAC address, and connection type of the devices that are not
connected and are blocked from accessing the network.
6. To add a device to the blocked list, do the following:
a. Click the Add button.
The Add Blocked Device page displays.
b. Enter the MAC address and device name for the device that you want to block.
c. On the Add Blocked Device page, click the Apply button.
The device is added to the blocked list on the Access Control page.
7. To remove a device from blocked list, do the following:
a. Select the check box for the device.
b. Click the Delete button.
The device is removed from the blocked list.
8. Click the Apply button.
Your settings are saved.
Use Keywords to Block Internet Sites
You can block keywords and domains (websites) to prevent certain types of HTTP traffic from accessing your
network. By default, keyword blocking is disabled and no domains are blocked.
Control Access to the Internet
129
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000
To Next Page
Loading...
Need help?
General
Weight and Dimensions
