After you reset the modem router to factory default settings, the user name is admin, the password is password, the
LAN IP address is 192.168.0.1 (which is the same as www.routerlogin.net), and the DHCP server is enabled. For
a list of factory default settings, see Factory Settings on page 289.
Use the Reset Button
CAUTION:
This process erases all settings that you configured in the modem router.
To reset the modem router to factory default settings:
1. On the back of the modem router, locate the Reset button to the right of the leftmost antenna.
2. Using a straightened paper clip, press and hold the Reset button for at least five seconds.
3. Release the Reset button.
The Power LED starts blinking amber and the configuration is reset to factory default settings. When the reset
is complete, the modem router reboots.This process takes about two minutes.
Manage the Modem Router and Monitor the Traffic
224
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000