The Backup Settings page displays.
5. Click the Back Up button.
6. Choose a location to store the file on your computer.
The name of the backup file is NETGEAR_D7000.cfg.
7. Follow the directions of your browser to save the file.
Restore the Settings
If you backed up the configuration file, you can restore the configuration from this file.
To restore configuration settings that you backed up:
1. Launch a web browser from a computer or WiFi device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the modem router user name and password.
The user name is admin.The default password is password.The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Administration > Backup Settings.
The Backup Settings page displays.
5. Click the Browse button and navigate to and select the saved configuration file.
The name of the backup file from which you can restore the configuration is NETGEAR_D7000.cfg.
6. Click the Restore button.
The configuration is uploaded to the modem router.When the restoration is complete, the modem router reboots.
This process takes about two minutes.
WARNING:
To avoid the risk of corrupting the firmware, do not interrupt the restoration. For
example, do not close the browser, click a link, or load a new page. Do not turn off
the modem router.Wait until the modem router finishes restarting and the Power
LED turns solid white.
Manage the Modem Router and Monitor the Traffic
222
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000
To Next Page
Loading...
Need help?
General
Weight and Dimensions
