Disable the Built-In DHCP Server
By default, the modem router functions as a DHCP server.The modem router assigns IP, DNS server, and default
gateway addresses to all devices connected to the LAN.The assigned default gateway address is the LAN address
of the modem router.
You can use another device on your network as the DHCP server or specify the network settings of all your computers.
If you disable the DHCP server and no other DHCP server is available on your network, you
must set your computer IP addresses manually so that they can access the modem router.
Note
To disable the built-in DHCP server:
1. Launch a web browser from a computer or WiFi device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the modem router user name and password.
The user name is admin.The default password is password.The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Setup > LAN Setup.
The LAN Setup page displays.
5. Clear the Use Router as DHCP Server check box.
6. Click the Apply button.
Your settings are saved.
Change the Modem Router’s Device Name
The modem router’s device name is D7000.
This device name displays in a file manager when you browse your network.
To change the modem router’s device name:
1. Launch a web browser from a computer or WiFi device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the modem router user name and password.
Manage the WAN and LAN Network Settings
213
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000
To Next Page
Loading...
Need help?
General
Weight and Dimensions
