DescriptionField
Use the default MAC address.Use Default Address
The modem router captures and uses the MAC address of the computer that you
are now using.You must use the one computer that is registered by the ISP.
Use Computer MAC Address
Enter the MAC address that you want to use. By default, the field displays the MAC
address of the Internet port.
Use This MAC Address
DHCP Options
Enter the vendor class identifier (VCI) string, as indicated by your ISP.
If your ISP did not provide you with a VCI string, leave this field blank.
Vendor Class Identifier String (option
60)
Enter the client identifier (client ID) string, as indicated by your ISP.
If your ISP did not provide you with a client ID string, leave this field blank.
Client Identifier String (option 61)
13. Click the Apply button.
Your settings are saved.
14. Click the Test button to test your Internet connection.
If the NETGEAR website does not display within one minute, see Troubleshoot the Internet Connection on page
279.
Specify an ADSL Connection With a Login Requirement and
PPPoA or PPPoE Service
If you want to manually configure the ADSL connection settings, use the information that your ISP gave you to log
in and connect to your Internet service. If you cannot find this information, contact your ISP. Entering incorrect
information might prevent the modem router from connecting to the Internet.
The modem router provides a virtual Internet interface and a virtual IPTV interface. In most situations, you only need
to configure the Internet interface. If you use one or more IPTV devices, you might also need to configure the IPTV
interface. Follow the directions that your ISP gave you.
If you must configure the IPTV interface, first use the following procedure to configure the
Internet interface.Then, repeat the procedure to configure the IPTV interface.
Note
Manage the Internet Settings Manually
54
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000
To Next Page
Loading...
Need help?
General
Weight and Dimensions
