NETGEAR D7000

4. Select Guest Network.
5. Enable the guest network and configure its WiFi settings as described in the following table.
DescriptionField
Wireless Network (2.4GHz b/g/n)
The SSID is the 2.4 GHz WiFi band name. If you did not change the SSID, the default SSID
displays, which is NETGEAR_Guest1.
To change the SSID in the 2.4 GHz WiFi band for the guest WiFi network, enter a 32-character
(maximum), case-sensitive name in this field.
Name (SSID)
This field is of an informational nature and shows the channel that is configured in the 2.4 GHz
band for the main WiFi network.You cannot change the channel in the 2.4 GHz band for the
guest WiFi network.
Channel
Manage the WiFi Network Settings
109
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000