EasyManuals Logo

NETGEAR D7000 User Manual

NETGEAR D7000
293 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #142 background imageLoading...
Page #142 background image
DescriptionField
Send alerts and logs through e-mail
Enter the name of your ISP’s outgoing (SMTP) mail server (such as mail.myISP.com).
You might be able to find this information in the configuration window of your email
program. If you leave this field blank, log and alert messages are not sent.
Your Outgoing Mail Server
Enter the email address to which logs and alerts must be sent.Send to This E-mail Address
Select this check box to send messages over a secure connection.Secure connection (use SSL)
If your outgoing email server requires authentication, select this check box and
specify the following settings:
• In the User Name field, enter the user name for the outgoing email server.
• In the Password field, enter the password for the outgoing email server.
My mail server requires authentication
Send Alert Immediately
Select this check box to enable the modem router to send an email alert immediately
when it detects a denial of service (DoS) attack.
If a DoS attack is detected
Select this check box to enable the modem router to send an email alert immediately
when it detects a port scan.
If a Port Scan is detected
By default, this check box is selected and the modem router sends an email alert
immediately when someone attempts to visit a blocked site.
When someone attempts to visit a
blocked site
Send logs according to this schedule
To send logs based on a schedule, select one of the following options from the menu:
• When log is full.This is the default selection.
• Hourly. Logs are sent every hour.
• Daily. Logs are sent every day. From the Time menu, specify the time of day, and select the am or pm radio button.
• Weekly. Logs are sent every week. From the Day menu, select the day. From the Time menu, specify the time of day,
and select the am or pm radio button.
If you do not want logs to be sent at all, select None from the menu.
7. Click the Apply button.
Your settings are saved.
Control Access to the Internet
142
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000

Table of Contents

Other manuals for NETGEAR D7000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR D7000 and is the answer not in the manual?

NETGEAR D7000 Specifications

General IconGeneral
Ethernet LANYes
Cabling technology10/100/1000Base-T(X)
Networking standardsIEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
ModulationPSK
Wi-Fi bandDual-band (2.4 GHz / 5 GHz)
Wi-Fi standards802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standardWi-Fi 5 (802.11ac)
WLAN data transfer rate (max)1300 Mbit/s
Memory card slot(s)No
Ethernet LAN (RJ-45) ports5
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity3
DSL specificationVDSL, VDSL2, ADSL, ADSL2, ADSL2+
Web-based management-
Firewall securitySPI, NAT
Security algorithmsWPA, WPA2-PSK, WPS
Product typeTabletop router
Product colorBlack
Housing materialPlastic
Flash memory128 MB
Internal memory256 MB
Processor cores2
Processor frequency1000 MHz
Windows operating systems supportedWindows 2000, Windows 7, Windows 8, Windows Vista, Windows XP
Cables includedLAN (RJ-45), Phone (RJ-11)
Supported network protocolsIPv6
Power source typeAC
Package typeBox
Weight and Dimensions IconWeight and Dimensions
Depth185 mm
Width285 mm
Height50 mm
Weight750 g

Related product manuals