NETGEAR D7000 User Manual

By default, the name is Workgroup. The name works only in an operating system that supports NetBIOS, such
as Microsoft Windows. If you are using a Windows workgroup rather than a domain, the workgroup name is
displayed here.
8. Enable or disable access methods by selecting or clearing the corresponding check boxes and specifying access
to the storage device as described in the following table.
DescriptionAccess Method
Enabled by default.You can type \\readyshare to access the storage device within your
network. If you change the name in the Network/Device Name field from readyshare to
another name, the link changes accordingly.
Network Connection
Enabled by default.You can type http://readyshare.routerlogin.net/shares to access the
USB device within your network and download or upload files. In this URL, readyshare is
the name that is specified in the Network/Device Name field. If you change the name in the
Network/Device Name field from readyshare to another name, the link changes accordingly.
You can also click the link that is shown in the Link column.The fixed port is number is 80.
HTTP
Disabled by default. If you enable this feature, remote users can type https://<public IP
address>/shares to access the USB device over the Internet. <public IP address> is the
external or public IP address that is assigned to the modem router (for example, 1.1.10.102).
This feature supports file uploading only. The default port is number 443, which you can
change.
HTTPS (via internet)
Enabled by default.You can type ftp://readyshare.routerlogin.net/shares to access the
USB device within your network and download or upload files. In this URL, readyshare is
the name that is specified in the Network/Device Name field. If you change the name in the
Network/Device Name field from readyshare to another name, the link changes accordingly.
You can also click the link that is shown in the Link column.The fixed port is number is 21.
FTP
Disabled by default. If you enable this feature, remote users can type ftp://<public IP
address>/shares to access the USB device over the Internet and download or upload files.
<public IP address> is the external or public IP address that is assigned to the modem router
(for example, 1.1.10.102).
The default port is number 21, which you can change.
If you set up Dynamic DNS (see Set Up and Manage Dynamic DNS on page 176), you can
also type a URL domain name. For example, if your domain name is MyName and you use
the NETGEAR DDNS server, you can type ftp://MyName.mynetgear.com to access the
USB device over the Internet and download or upload files.
FTP (via internet)
9. Click the Apply button.
Your settings are saved.
Share a Storage Device
165
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000

NETGEAR D7000 Specifications

General

Ethernet LAN	Yes
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Modulation	PSK
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Wi-Fi standards	802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standard	Wi-Fi 5 (802.11ac)
WLAN data transfer rate (max)	1300 Mbit/s
Memory card slot(s)	No
Ethernet LAN (RJ-45) ports	5
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	3
DSL specification	VDSL, VDSL2, ADSL, ADSL2, ADSL2+
Web-based management	-
Firewall security	SPI, NAT
Security algorithms	WPA, WPA2-PSK, WPS
Product type	Tabletop router
Product color	Black
Housing material	Plastic
Flash memory	128 MB
Internal memory	256 MB
Processor cores	2
Processor frequency	1000 MHz
Windows operating systems supported	Windows 2000, Windows 7, Windows 8, Windows Vista, Windows XP
Cables included	LAN (RJ-45), Phone (RJ-11)
Supported network protocols	IPv6
Power source type	AC
Package type	Box

Weight and Dimensions

Depth	185 mm
Width	285 mm
Height	50 mm
Weight	750 g