To allow only approved USB devices to connect to the modem router and specify which USB devices
are approved:
1. Make sure that the USB device or devices that you want to approve are attached to the modem router.
2. Launch a web browser from a computer or WiFi device that is connected to the network.
3. Enter http://www.routerlogin.net.
A login window opens.
4. Enter the modem router user name and password.
The user name is admin.The default password is password.The user name and password are case-sensitive.
The BASIC Home page displays.
5. Select ADVANCED > Advanced Setup > USB Settings.
The USB Settings page displays.
6. Select the No radio button.
By default the Yes radio button is selected.This setting lets you connect and access all your USB devices.
7. Click the Apply button.
Your settings are saved.
8. Click the Approved Devices button.
9. In the Available USB Devices table, select the USB device that you want to approve.
10. Click the Add button.
The USB device is added to the Approved USB Devices table.
11. To approve another USB device that is already attached to the modem router, repeat Step 10 and Step 11.
12. Select the Allow only approved devices check box.
13. Click the Apply button.
Share a Storage Device
172
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000
To Next Page
Loading...
Need help?
General
Weight and Dimensions
