An example is Internet Relay Chat (IRC).Your computer connects to an IRC server at destination port 6667. The
IRC server not only responds to your originating source port but also sends an “identify” message to your computer
on port 113. Using port triggering, you can tell the modem router, “When you initiate a session with destination port
6667, you must also allow incoming traffic on port 113 to reach the originating computer.”
The following sequence shows the effects of this port triggering rule:
1. You open an IRC client program to start a chat session on your computer.
2. Your IRC client composes a request message to an IRC server using a destination port number of 6667, the
standard port number for an IRC server process.Your computer then sends this request message to your modem
router.
3. Your modem router creates an entry in its internal session table describing this communication session between
your computer and the IRC server.Your modem router stores the original information, performs Network Address
Translation (NAT) on the source address and port, and sends this request message through the Internet to the
IRC server.
4. Noting your port triggering rule and observing the destination port number of 6667, your modem router creates
another session entry to send any incoming port 113 traffic to your computer.
5. The IRC server sends a return message to your modem router using the NAT-assigned source port (for example,
port 33333) as the destination port and also sends an “identify” message to your modem router with destination
port 113.
6. When your modem router receives the incoming message to destination port 33333, it checks its session table
to see if a session is active for port number 33333. Finding an active session, the modem router restores the
original address information replaced by NAT and sends this reply message to your computer.
7. When your modem router receives the incoming message to destination port 113, it checks its session table
and finds an active session for port 113 associated with your computer.The modem router replaces the message’s
destination IP address with your computer’s IP address and forwards the message to your computer.
8. When you finish your chat session, your modem router eventually senses a period of inactivity in the
communications.The modem router then removes the session information from its session table, and incoming
traffic is no longer accepted on port numbers 33333 or 113.
Manage Port Forwarding and Port Triggering
272
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000
To Next Page
Loading...
Need help?
General
Weight and Dimensions
