a. Fully insert the DSL cable in the correct port on the modem and in the gray DSL port on the modem
router.
b. Select the I corrected a problem with the DSL/Ethernet cable radio button.
c. Click the Next button.
• If you do not need to power cycle the modem or the DSL cable is already fully inserted in the correct ports,
do the following:
a. Select the None of the above radio button.
b. Click the Next button.
20. (Only if the following page displays) Specify how to manage problems with the detection of the IP address for
the Internet connection.
The page that might display states that a problem occurred while the wizard was detecting the Internet connection
IP address. If this page does not display, continue with the Step 21.
Take one of the following actions:
• If your ISP assigned you a fixed (static) IP address, do the following:
Install and Access the Modem Router and Its Network
29
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000
To Next Page
Loading...
Need help?
General
Weight and Dimensions
