NETGEAR ProSafe GS108 User Manual

B-1
v1.0, May 2007
Appendix B
Virtual Local Area Networks (VLANs)
A Local Area Network (LAN) can generally be defined as a broadcast domain. Hubs, bridges or
switches in the same physical segment or segments connect all end node devices. End nodes can
communicate with each other without the need for a router. Routers connect LANs together,
routing the traffic to the appropriate port.
A virtual LAN (VLAN) is a local-area network with a definition that maps workstations on some
other basis than geographic location (for example, by department, type of user, or primary
application). To communicate between VLANs, traffic must go through a router, just as if they
were on two separate LANs.
A VLAN is a group of PCs, servers and other network resources that behave as if they were
connected to a single, network segment—even though they may not be. For example, all
marketing personnel may be spread throughout a building. Yet if they are all assigned to a single
VLAN, they can share resources and bandwidth as if they were connected to the same segment.
The resources of other departments can be invisible to the marketing VLAN members, accessible
to all, or accessible only to specified individuals, depending on how the IT manager has set up the
VLANs.
The Advantages of VLANs:
• Easy to do network segmentation: Users that communicate most frequently with each other
can be grouped into common VLANs, regardless of physical location. Each group's traffic is
largely contained within the VLAN, reducing extraneous traffic and improving the efficiency
of the whole network.
• Easy to manage: The addition of nodes, as well as moves and other changes, can be dealt with
quickly and conveniently from a management interface rather than from the wiring closet.
• Increased performance: VLANs free up bandwidth by limiting node-to-node and broadcast
traffic throughout the network.
• Enhanced network security: VLANs create virtual boundaries that can only be crossed through
a router. So standard, router-based security measures can be used to restrict access to each
VLAN

NETGEAR ProSafe GS108 Specifications

General

MAC address table	8000 entries
Maximum data transfer rate	1 Gbit/s
Full duplex	Yes
Networking standards	IEEE 802.3ab, IEEE 802.3i, IEEE 802.3u
Copper ethernet cabling technology	1000BASE-T, 100BASE-TX, 10BASE-T
Latency	20 μs
Dimensions (WxDxH)	235.5 x 100.8 x 27 mm
Power requirements	5 V @ 2.8 A DC
Networking features	Ethernet, Fast Ethernet, Gigabit Ethernet
Switch type	Unmanaged
Basic switching RJ-45 Ethernet ports quantity	8
Noise level	0 dB
Mean time between failures (MTBF)	91.500 h
Power consumption (typical)	14 W
Safety	UL (UL 1950), CUL, C-Tick
LED indicators	Link, Power
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	10 - 95 %
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Weight	760 g