NETGEAR ProSafe GS108 User Manual

GS108T Smart Switch Software Administration Manual
4-36 Configuring the Switch
v1.0, May 2007
• Resending EAP: Defines the amount of time (in seconds) that lapses before EAP requests
are resent. The field default is 30 seconds.
• Max EAP Requests: Displays the total amount of EAP requests sent. If a response is not
received after the defined period, the authentication process is restarted. The field default
is 2 retries.
• Supplicant Timeout: Displays the amount of time (in seconds) that lapses before EAP
requests are resent to the supplicant. The field default is 30 seconds.
• Server Timeout: Displays the amount of time (in seconds) that lapses before the device
re-sends a request to the authentication server. The field default is 30 seconds.
• Termination Cause: Indicates the reason for which the port authentication was
terminated, please reference to help age of real device FW V1.0.1_03.
3. Click Apply.
EAP Statistics
The EAP Statistics page contains information about EAP packets received on a specific port.
1. Click EAP Statistics in the blue navigation panel. A screen similar to that shown below
appears.

NETGEAR ProSafe GS108 Specifications

General

MAC address table	8000 entries
Maximum data transfer rate	1 Gbit/s
Full duplex	Yes
Networking standards	IEEE 802.3ab, IEEE 802.3i, IEEE 802.3u
Copper ethernet cabling technology	1000BASE-T, 100BASE-TX, 10BASE-T
Latency	20 μs
Dimensions (WxDxH)	235.5 x 100.8 x 27 mm
Power requirements	5 V @ 2.8 A DC
Networking features	Ethernet, Fast Ethernet, Gigabit Ethernet
Switch type	Unmanaged
Basic switching RJ-45 Ethernet ports quantity	8
Noise level	0 dB
Mean time between failures (MTBF)	91.500 h
Power consumption (typical)	14 W
Safety	UL (UL 1950), CUL, C-Tick
LED indicators	Link, Power
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	10 - 95 %
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Weight	760 g