GS108T Smart Switch Software Administration Manual
3-18 Managing System Settings
v1.0, May 2007
LLDP Group Port Configuration
The LLDP Group port configuration allows user to configure a group of ports at a time.
Configured values will be applied only to selected ports of the switch.
LLDP Statistics
1. Click Statistics in the blue navigation panel. A screen similar to that shown below appears.
.
The following LLDP statistics are displayed:
• Number of Inserts: Total number of Inserts.
MED C Capabilities
N Network Policy
L Location ID
M MDI
I Inventory
Figure 3-16
Table 3-1. Legends for Optional Enabled TLVs (continued)
Category Legend Meaning
To Next Page
Loading...
