GS108T Smart Switch Software Administration Manual
Configuring the Switch 4-33
v1.0, May 2007
– RADIUS, None: Provides port authentication, first using the RADIUS server. If the
port is not authenticated, then no authentication method is used, and the session is
permitted.
• Guest VLAN: Specifies whether the Guest VLAN is enabled on the device. The possible
field values are:
– Enable: Enables using a Guest VLAN for unauthorized ports. If a Guest VLAN is
enabled, the unauthorized port automatically joins the VLAN selected in the VLAN
List field.
– Disable: Disables port-based authentication on the device. This is the default.
• VLAN List: Contains a list of VLANs. The Guest VLAN is selected from the VLAN list.
• Forward DOT1x EAPOL: When the Port-based Authentication State is disabled, users
can enable or disable flooding EAPOL.
3. Click Apply.
Port Authentication
The Port Authentication page allows network managers to configure port-based authentication
global parameters.
1. Click Port Authentication in the blue navigation panel. A screen similar to that shown below
appears.
To Next Page
Loading...
