GS108T Smart Switch Software Administration Manual
Configuring the Switch 4-31
v1.0, May 2007
Static Multicast Group
Static Multicast Addressing provides a way to add or delete a static multicast address and VLAN
ID in the system.
1. Click Static Multicast Group in the blue navigation panel. A screen similar to that shown
below appears.
.
2. View or specify the Static Multicast Group settings as desired.
3. Click Apply.
Security
Click Security in the middle part of the blue navigation panel to expand the item to Properties,
Port Authentication, EAP Statistics, Statistics, Port Security, and Trusted MAC.
Figure 4-50
To Next Page
Loading...
