NETGEAR ProSafe GS108 User Manual

A-1
v1.0, May 2007
Appendix A
Specifications and Default Values
GS108T Gigabit Smart Switch Specifications
The GS108T Gigabit Smart Switch conforms to the TCP/IP, UDP, HTTP, ICMP, TFTP, DHCP,
802.1D, 802.1p, and 802.1Q standards.
Table A-1. GS108T Gigabit Smart Switch Specifications
Feature Value
Interfaces 8G (P01 - P08)
PoE N/A
Flash Memory Size 2MB
SRAM Size and Type 16MB DDR
Table A-2. Switch Performance
Feature Value
Switching Capacity 8 x 2 Gbps
Forwarding Method Store and Forward
Packet Forwarding Rate 10M:14,880 pps / 100M:148,809 pps / 1G:1,488,095
pps
MAC addresses 4K
Packet RAM buffer capacity 128K-bytes

NETGEAR ProSafe GS108 Specifications

General

MAC address table	8000 entries
Maximum data transfer rate	1 Gbit/s
Full duplex	Yes
Networking standards	IEEE 802.3ab, IEEE 802.3i, IEEE 802.3u
Copper ethernet cabling technology	1000BASE-T, 100BASE-TX, 10BASE-T
Latency	20 μs
Dimensions (WxDxH)	235.5 x 100.8 x 27 mm
Power requirements	5 V @ 2.8 A DC
Networking features	Ethernet, Fast Ethernet, Gigabit Ethernet
Switch type	Unmanaged
Basic switching RJ-45 Ethernet ports quantity	8
Noise level	0 dB
Mean time between failures (MTBF)	91.500 h
Power consumption (typical)	14 W
Safety	UL (UL 1950), CUL, C-Tick
LED indicators	Link, Power
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	10 - 95 %
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Weight	760 g