GS108T Smart Switch Software Administration Manual
Configuring the Switch 4-13
v1.0, May 2007
.
2. Input the PVID for each port.
3. Click Apply.
Port-Based VLAN
Single or multiple ports are grouped into a smaller virtual network, which is independent of the
other ports. The switch supports 8 port-based VLANs. Any user-assigned VLAN cannot have
member ports that belong to different port groups.
Click VLAN Group Setting in the blue navigation panel. A screen similar to that shown below
appears when Port-Based VLAN is selected for the VLAN group setting.
Figure 4-34
Note: If you want to change the port's default PVID, you must first add the VLAN
Group including the port.
To Next Page
Loading...
